Industrial Graphited Gasket. The graphite gasket is cut out from a full graphite sheet. it is cut as per according to flanges size. There are 2 types of cutting- FULL FACE OR RAISED FACE. FULL FACE- Cut out the gasket as per flange and able to cover whole flange one side surface. The bolts hole is visible. RAISED FACE - Cut out the gasket to place on flange center. It is a ring and no bolt holes. Graphite gasket thickness is standard 3mm with wire reinforcement and cut as per flange standard. E.g. Graphite gasket 3mm, JIS 10k standard and Full Face / Raised Face (See picture) Our graphite gasket brand is IT1000, a) Ideal for heavy industrial gas or steam piping  b) Solid body enable gasket for high temperature and pressure resistance. c) Used for absorbing friction in between flanges.  d) Long storage life. read more

STAINLESS STEEL BELLOW  COUPLE WITH TIE RODS BOTH ENDS STAINLESS STEEL FLANGES CENTER IS CORRUGATED BELLOW TO ORDER THIS ITEM, PLEASE PROVIDE INFORMATION BELOW. 1. THE PIPE SIZE. 2. THE BELLOW OAL 3. FLANGE STANDARD 4. TIE RODS NEEDED? 5. TIE RODS QUANTITY 6. CHNNELING MEDIUM 7. REQUIRED PRESSURE. read more

DELTECH RED MULTIPURPOSE HOSE INNER LAYER: BLACK SMOOTH SYNTHETHIC RUBBER, RESISTANT TO 55% AROMATIC CONTENT. THEN, HIGH STRENGTH SYNTHETHIC POLYESTER BRAIDED TO INCREASE THE HOSE STRENGTH. OUTER LAYER: IT IS A RED RUBBER SURFACE, WEATHER AND OIL RESISTANT. TEMPERATURE RESISTANT RANGE: -20 DEG C TO 80 DEG C (MAX: 100 DEG C) STANDARD PRESSURE RESISTANT: 300 PSI/ 20 BAR APPLICATIONS: FOR GENERAL HEAVY INDUSTRIAL USE. HOSE CAN BE USED FOR CHANNELING WATER, AIR, OIL, LUBRICANT OIL, KEROZENE AND PETROLUEM. SIZE: RANGING FROM 1/4'' - 1 1/2'' (LENGTH OF HOSE VARIES) ITEM SOLD IN FULL ROLL. WHEN YOU ARE TO ORDER, PLEASE INFORM US  REQUIRED SIZE. read more

CUSTOM MADE BLACK RUBBER HOSE PICTURE HOSE: 25MM ID LENGTH: 1.5MTR C/W CAMLOCK PART C SS316 CRIMPED ON BOTH ENDS HOSE WORKING PRESSURE: 300PSI/ 20BAR SMOOTH SURFACE SYNTHETIC RUBBER. COMMONLY USED IN HEAVY INDUSTRIES FOR CHANELLING AIR OR WATER. TO ORDER THIS ITEM. 1. WHAT IS THE HOSE SIZE 2. WHAT IS THE HOSE LENGTH 3. BOTH ENDS CONNECTION. (CAMLOCK, FLANGES OR THREADED IN MALE OR FEMALE) read more

Pollen Aluminum Oxide Cutting Disc. size 4" thickness: 1.2mm Suit for metal and steel cutting. Basic Features a) Durable item. b) Sharp edge enhance the cutting speed. c) Best seller -Price to Quality Ratio is Excellent. d) Tested, it is widely accepted in local industry. BEST SELLER read more

read more

YUXI FLAP DISC SIZE: 4'' GRIT: #60 - #320 EXCELLENT FOR STAINLESS TEEL AND METAL SURFACE GRINDING DISC IS WELL CONSTRUCTED FOR INDUSTRIAL USE read more

This is the widely accepted industrial cotton gloves. Red Lined Wrist Expandable Body Total weight per dzn close to 500grams Good hand protection. read more

SK34 Fire Bricks Side Arch standard size: 9" (230mm) Length x 4 1/2"  (110mm) Width x 3" (75mm) & 2 1/2" (65mm) able to withstand 1500-1600 deg c read more