Deltech Engineering Sdn Bhd
23, Jalan Permatang 12,
Taman Desa Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+607-355 8118
+607-355 9119

Our Product

Deltech Abrasive Products Series.

We offer a series of abrasive products for customer to polish, shape and surface finishing.
Products consist of sandpaper, cutting disc, grinding disc, flap wheel, flap disc, mounted point and salnding belt etc.
Brands we have Taga Chili, Norton, XO, Keen-X etc.
Check with us for more information about our abrasive products.

XO Grinding Disc

NORTON K246 Sanding Roll

Deerfos Flap Wheel

(*best seller) Pollen Cutting Disc 4'' x 1.2mm

Masking Tape


Aluminium Foil Tape

Deltech Bellow Products

Bellows are used as a vibration absorber in between steel pipes. There are a few types of bellows available such as typical rubber bellow, flexible hose expansion joint or corrugated bellow with tie rods.


Double Rubber Bellow Both End Unions

SS Flexible Joint

Single Rubber Bellow Both End Flanges

Deltech Camlock Series

Camlock available in different materials such as aluminum, SS316, Brass or PP.
Click in to check camlock models.  

Hose Connector- Camlocks

Deltech Flash Lights

Different brands and different models of industrial type flash light for selection.
Avaible in different styel- handheld, pen type or headlamp.

Nicron Flash Light Model: EXB90


Torque Wrench




Ingersoll Rand IR259 3/4" Dr Impact Wrench

Ingersoll Rand 231C-AP 1/2" dr Air Impact Wrench

Industrial gasket is a thin layer of object made of graphite, paper, sealant or rubber to absorb high pressure and sealing gaps in between flanges or locking screw parts area.





Deltech Flexible SS Hose

Looking for paints?

We have paints for different applications for household or industry. 
Paints for concrete buildings- interior or exterior. Gloss paints for steel structures and woods. Aluminum heat resisting paints.
Industrial road line paints- reflective or non reflective or heavy duty epoxy floor paints. 
Before applying surface paint, you would need of different types of primers. We have oxide primers, wall sealers and wood sealers etc.
High temperature resistant paint is under our scope too, we have aluminum paint 200 deg C, 400 deg C and 600 deg c.
Brands in hand- Nippon, CM paints, Kansai and IC Dulux. 

Call us for more information about paint.

ICI Maxilite Plus

CM Paints


Dulux 2554 Aluminum Paint

Deltech Pneumatic Products

A full series of pneumatic guns available.
Long and short nozzles. Ranging from normal usage to heavy duty.
Click in to find out more about each type of pnuematic tools.

THB High Flow Air Blow Gun B90

THB Air Blow Gun B91 Long Nozzle

MGT Air Blow Gun AD11

Pneumatic Nylon Tubing

Deltech Power Tools

Industrial power tools- consist of corded and cordless tools.
The featured brand - Akaido cordles tools.
Sturdy body, long life span, easy to operate.
Click in to find out more about Akaido Power Tools.

Power Tools and Welding Machines Repair

Akaido Cordless Power Tools


Deltech engineering carry a wide range hardware products. One of our core products is Refractory/ heat insulating products.

This line consists of castables, fire clay, bricks, isowool fibre blanket and board, rockwool, calcium silicate board and mouldable refractories etc for build, repair or maintenance of furnaces, boilers, kilns and smelting pots up to temperature 1700 deg c.

These products are widely used in the industries of petrol-chemical, palm oil mills, steel/ iron foundries, chemical/ material recycling plants and food processing etc. Most of the refractory products come along with specification sheets and we stock up most of the refractories products. We are now so far the only company in Johor Bahru to sell these refractory items in loose.

We also engage with a strong and experienced team for furnace, kiln and piping insulation jobs.

Call us for more products information and engage us for furnace repair.

Below are representative Deltech Refractory products. Call us for more information about Heat Insulation.

Plibrico Super AB

SK34 Fire Bricks

Isowool Ceramic Fibre Blanket 1260

Morgan Blakite D Pre-Mixed Mortar 20kg

Deltech is a supplier for your factory lifting and rigging needs.

The products in our rigging and lifting line consist of chain block, lever block, webbing sling, chain slings, wire rope slings, hooks, G80 alloy-chain, galvanized or ungalvanized wire rope, wire rope clips, shackle, lifting-jacks and many related accessories. All these products come from a large selection of brands: Armstrong, AMS, Southern Wire, Poly-Tex BST, Vital and many others. Products are tested and ensured safe to be used.  In-house test certificate is available with very minimum cost upon purchase.

Some of the products can be modified or made to meet users' needs. We offer custom-made chain sling based on your lifting requirements. A line of chain sling consists of master link, alloy chain, clevis link and hook with safety latch. The common 2, 3 or 4 legged chain sling can be added according to your requirement. Chain block's lifting chain and hand chain can be added for extra metre base on customer's requirement.

Armstrong Chain Block

Armstrong Lever Block

Armstrong Link Chain

In-House Testing and Certification

Deltech Safety Shoes Series

We have 2 featured safety shoes- D&D and King's
Our shoes comply to all basic requirements such as steel sole and cap, anti static, pu sole and leather body.
Clock in to found out more about safety shoes brand and model.

D&D Safety Shoes

King's Safety Shoes


3M Comfort Grip Glove

Deltech Screws Series.

There are a few bsic types of screw.
Pan Head SELF Tapping/ Drilling Screw
CSK SELF Tapping/ Drilling Screw
Hexagon Head Self Drilling Screws
Various type of screw out there. We have listeed out those common ones and sizes.
Click in below to find our more.

Yellow Zinc Chromed Hex Head Roofing Screw C/w Washer

Chromed/Stainless Steel Pan Head Self Tapping Screw

Chromed/Black Dry Wall Screw

Chromed/Stainless Steel CSK Head Self Drilling Screw

Deltech Welding Series Provide Customers Total Welding And Metalworking Solutions. We Offer A Complete Range Of Welding Machines And Equipment To Cater All Industrial Needs. Basic Welding And Metal Work Machines Model Are Mma, Mig,Tig,Plasma Cutter And Gas Cutting. Our Products And Services Are Applicable To A Wide Range Of Industries Including Marine, Offshore, Oil And Gas, Metal Fabrication, Pipeline Welding And Jointing, Heavy Industries, Construction, Automotive And Workshop.

We Are Proud To Present Our Brand Of Welding Machine- Maxxi Korea. Each Machine Is Well Designed And Created. Machine Quality And Perfromance Were Proven By The Market. Our Machine Can Be Found In All Type Of Industries. Machines Are Backed With 1 Year Warranty.



Shiyo Elctrode Holder 300amp or 500amp


Switch to Mobile Version
Recent Updates
Subscribe Newsletter
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)